 |
 |
 |
 |
| Note the 1 x 1½inch tubular steel studs running the length of the main frame for added support, the 6”steel plates in the center of the frame are backing plates for the center flush mount 6000 pound tie down brackets |
Studs will vary in the sidewalls from 10”to 16”centers on wood framed units. |
The roof is 6” thick in the center and double insulated with fiberglass. Note that the roof is then covered with a 3/8”one piece structure wood giving you a full walk on roof. |
Polyurethane inner wheel well to protect against road debris. Plus 8 1500 pound steel backed tie downs located on both sides of the cargo area. |
 |
 |
 |
 |
| Wood ceiling rafters located every 16”with central air ducts. |
One piece fiberglass tub and shower with color coded hot and cold water lines and Porcelain toilet with bowl spray nozzle. |
Optional Aluminum framed Vacuum-Bonded side walls with high gloss gel-coat exterior fiberglass and décor interior paneling. Note: The fiberglass as shown has a clear plastic cover over it for protection during assembly. |
Beaver tail chassis to enable ease of loading low cars and bikes. Spare tire and wheel mounted between frame rails can be raised or lowered by cable. |
 |
 |
 |
 |
| 2,800 pound capacity Rear ramp door steel framed and insulated. Non skid interior surface and fiberglass exterior. |
5thwheel chassis with 10”I-Beam showing 40 Gallon fuel tank, large water tank and 6000 pound flush mount tie down backing plates. |
Main frame I-Beam will vary from 8”to 10”depending on the model, we also use steel cross members reinforced with 3/8”steel rod for added strength and durability. |
Steel Z-Rail connected directly to the main frame for added sidewall support allowing your sidewalls to be bolted directly to the frame and not just setting on the floor. |
 |
 |
| 150 Gallon fresh water capacity with a 1 ½“quick release fresh water drain valve |
